# Haier Dryer F2 error Canonical page: https://getfixfault.com/guides/haier-dryer-f2-official-code AI-readable URL: https://getfixfault.com/guides/haier-dryer-f2-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Haier Dryer F2: drainage-pump failure. This interpretation applies to Haier dryer models covered by the linked Saudi F2 support article in Saudi Arabia / English. ## Exact scope - Brand: Haier - Appliance: Dryer - Error code or indicator: F2 - Model scope: Haier dryer models covered by the linked Saudi F2 support article - Region: Saudi Arabia / English ## What users may observe - F2 is shown on the Haier dryer display, indicator, or connected app - The published condition is: drainage-pump failure - The documented pump or circulation function does not complete as expected while F2 is active - The important observation is when F2 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — drainage-pump failure - F2 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed - Model boundary — apply this interpretation only to Haier dryer models covered by the linked Saudi F2 support article ## Verified diagnosis - Photograph the complete F2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Haier dryer models covered by the linked Saudi F2 support article - Confirm that the observed condition matches the published meaning: drainage-pump failure - Published check — Cut power to the dryer and call Haier service - Published check — do not open the pump or electrical enclosure - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F2 remains, stop and move to exact-model diagnosis - Published check — If F2 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F2 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Cut power to the dryer and call Haier service - do not open the pump or electrical enclosure - If F2 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F2 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Cut power to the dryer and call Haier service; do not open the pump or electrical enclosure. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Haier Saudi dryer F2 support - Source URL: https://www.haier.com/sa/service-support/self-service/20230626_211589.shtml - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.