# Haier Refrigerator U1 error Canonical page: https://getfixfault.com/guides/haier-refrigerator-u1-official-code AI-readable URL: https://getfixfault.com/guides/haier-refrigerator-u1-official-code.txt Last reviewed: 2026-08-14 ## Direct answer Haier Refrigerator U1: function-module or communication error. This interpretation applies to Haier refrigerator models covered by the linked Saudi refrigerator/freezer support article in Saudi Arabia / English. ## Exact scope - Brand: Haier - Appliance: Refrigerator - Error code or indicator: U1 - Model scope: Haier refrigerator models covered by the linked Saudi refrigerator/freezer support article - Region: Saudi Arabia / English ## What users may observe - U1 is shown on the Haier refrigerator display, indicator, or connected app - The published condition is: function-module or communication error - The affected control, key, communication, configuration, or electronic function does not complete normally - The important observation is when U1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — function-module or communication error - U1 identifies the control or communication path but does not alone prove a particular board revision failed - Model boundary — apply this interpretation only to Haier refrigerator models covered by the linked Saudi refrigerator/freezer support article ## Verified diagnosis - Photograph the complete U1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Haier refrigerator models covered by the linked Saudi refrigerator/freezer support article - Confirm that the observed condition matches the published meaning: function-module or communication error - Published check — Record U1 and the full refrigerator model, then call Haier service - Published check — do not open the control or sealed cooling system - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if U1 remains, stop and move to exact-model diagnosis - Published check — If U1 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if U1 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Record U1 and the full refrigerator model, then call Haier service - do not open the control or sealed cooling system - If U1 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If U1 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Record U1 and the full refrigerator model, then call Haier service; do not open the control or sealed cooling system. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Haier Saudi refrigerator U1 support - Source URL: https://www.haier.com/sa/service-support/self-service/20191216_112153.shtml - Source checked: 2026-08-14 - Procedure verified: 2026-08-14 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.