# Haier Washing machine Fb error Canonical page: https://getfixfault.com/guides/haier-washing-machine-fb-official-code AI-readable URL: https://getfixfault.com/guides/haier-washing-machine-fb-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Haier Washing machine Fb: water leakage with the float switch triggered on models with a bottom cover. This interpretation applies to Haier washing-machine models with a bottom cover covered by the linked India support article in India / English. ## Exact scope - Brand: Haier - Appliance: Washing machine - Error code or indicator: Fb - Model scope: Haier washing-machine models with a bottom cover covered by the linked India support article - Region: India / English ## What users may observe - Fb is shown on the Haier washing machine display, indicator, or connected app - The published condition is: water leakage with the float switch triggered on models with a bottom cover - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when Fb appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water leakage with the float switch triggered on models with a bottom cover - Fb confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Haier washing-machine models with a bottom cover covered by the linked India support article ## Verified diagnosis - Photograph the complete Fb display before changing controls or removing power - Confirm that the full model number is covered by this scope: Haier washing-machine models with a bottom cover covered by the linked India support article - Confirm that the observed condition matches the published meaning: water leakage with the float switch triggered on models with a bottom cover - Published check — Power off the washing machine and call Haier service - Published check — do not remove the bottom cover or inspect live wiring - Stop at the published service boundary after these actions - do not add a restart or test cycle that Haier does not specify for Fb - Published check — Give service the Fb photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Haier does not specify for Fb ## Evidence-backed actions - Power off the washing machine and call Haier service - do not remove the bottom cover or inspect live wiring - Give service the Fb photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Power off the washing machine and call Haier service; do not remove the bottom cover or inspect live wiring. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Haier India washing-machine Fb support - Source URL: https://www.haier.com/in/service-support/self-service/20230625_211560.shtml - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.