# Hotpoint dishwasher F01 code Canonical page: https://getfixfault.com/guides/hotpoint-dishwasher-f01-code AI-readable URL: https://getfixfault.com/guides/hotpoint-dishwasher-f01-code.txt Last reviewed: 2026-08-03 ## Direct answer Hotpoint Dishwasher F01: Anti-flooding overflow protection. This interpretation applies to Hotpoint dishwasher models listed by the linked official code table in UK / English. ## Exact scope - Brand: Hotpoint - Appliance: Dishwasher - Error code or indicator: F01 - Model scope: Hotpoint dishwasher models listed by the linked official code table - Region: UK / English ## What users may observe - F01 is shown on the Hotpoint dishwasher display, indicator, or connected app - The published condition is: Anti-flooding overflow protection - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when F01 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Anti-flooding overflow protection - F01 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Hotpoint dishwasher models listed by the linked official code table ## Verified diagnosis - Photograph the complete F01 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Hotpoint dishwasher models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Anti-flooding overflow protection - Stop using the dishwasher - Record the displayed F01 code and full model number - Arrange a Hotpoint engineer visit - Published check — Hotpoint identifies dishwasher F01 as anti-flooding overflow protection and recommends booking an engineer - Published check — Do not attempt a component repair or restart cycle from this code alone - Stop at the published service boundary after these actions; do not add a restart or test cycle that Hotpoint does not specify for F01 ## Evidence-backed actions - Hotpoint identifies dishwasher F01 as anti-flooding overflow protection and recommends booking an engineer - Do not attempt a component repair or restart cycle from this code alone - Give service the F01 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop the cycle, close the water supply, and isolate power only if the area is dry and access is safe. Do not tilt or open fixed panels. ## Primary evidence - Source: Hotpoint UK integrated dishwasher error codes - Source URL: https://www.hotpoint.co.uk/service/integrated-dishwasher-repair/error-codes - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.