# Hotpoint Washing machine F02 error Canonical page: https://getfixfault.com/guides/hotpoint-washing-machine-f02-uk-official-code AI-readable URL: https://getfixfault.com/guides/hotpoint-washing-machine-f02-uk-official-code.txt Last reviewed: 2026-08-17 ## Direct answer Hotpoint Washing machine F02: a motor-circuit fault associated with intermittent or absent drum rotation. This interpretation applies to Hotpoint washing-machine models covered by the linked UK error-code table in United Kingdom / English. ## Exact scope - Brand: Hotpoint - Appliance: Washing machine - Error code or indicator: F02 - Model scope: Hotpoint washing-machine models covered by the linked UK error-code table - Region: United Kingdom / English ## What users may observe - F02 is shown on the Hotpoint washing machine display, indicator, or connected app - The published condition is: a motor-circuit fault associated with intermittent or absent drum rotation - The affected motor, drive, or movement function is stopped or limited while F02 is active - The important observation is when F02 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a motor-circuit fault associated with intermittent or absent drum rotation - F02 identifies a drive condition but does not alone prove the motor, inverter, belt, bearing, rotor, wiring, or control failed - Model boundary — apply this interpretation only to Hotpoint washing-machine models covered by the linked UK error-code table ## Verified diagnosis - Photograph the complete F02 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Hotpoint washing-machine models covered by the linked UK error-code table - Confirm that the observed condition matches the published meaning: a motor-circuit fault associated with intermittent or absent drum rotation - Published check — Book a Hotpoint engineer and quote F02 - Published check — Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F02 remains, stop and move to exact-model diagnosis - Published check — If F02 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F02 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Book a Hotpoint engineer and quote F02 - Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone - If F02 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F02 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow only the official Hotpoint instructions for the linked United Kingdom appliance table. Book a Hotpoint engineer and quote F02. Do not open fixed panels, test live wiring, or replace an internal component from the displayed code alone. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. ## Primary evidence - Source: Hotpoint UK washing-machine error-code table - Source URL: https://www.hotpoint.co.uk/service/washing-machine-repair/error-codes - Source checked: 2026-08-17 - Procedure verified: 2026-08-17 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.