# Hotpoint Washing machine F05 error Canonical page: https://getfixfault.com/guides/hotpoint-washing-machine-f05-uk-official-code AI-readable URL: https://getfixfault.com/guides/hotpoint-washing-machine-f05-uk-official-code.txt Last reviewed: 2026-08-17 ## Direct answer Hotpoint Washing machine F05: a waste-pipe blockage or pump issue that can leave water in the drum. This interpretation applies to Hotpoint washing-machine models covered by the linked UK error-code table in United Kingdom / English. ## Exact scope - Brand: Hotpoint - Appliance: Washing machine - Error code or indicator: F05 - Model scope: Hotpoint washing-machine models covered by the linked UK error-code table - Region: United Kingdom / English ## What users may observe - F05 is shown on the Hotpoint washing machine display, indicator, or connected app - The published condition is: a waste-pipe blockage or pump issue that can leave water in the drum - Water or condensate does not leave through the documented drain path as expected while F05 is active - The important observation is when F05 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a waste-pipe blockage or pump issue that can leave water in the drum - F05 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Hotpoint washing-machine models covered by the linked UK error-code table ## Verified diagnosis - Photograph the complete F05 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Hotpoint washing-machine models covered by the linked UK error-code table - Confirm that the observed condition matches the published meaning: a waste-pipe blockage or pump issue that can leave water in the drum - Published check — Check the model-approved pump filter, waste-water hose, and under-sink plumbing for blockages - Published check — If F05 remains, book a Hotpoint engineer - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F05 remains, stop and move to exact-model diagnosis - Published check — If F05 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F05 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Check the model-approved pump filter, waste-water hose, and under-sink plumbing for blockages - If F05 remains, book a Hotpoint engineer - If F05 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F05 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow only the official Hotpoint instructions for the linked United Kingdom appliance table. Check the model-approved pump filter, waste-water hose, and under-sink plumbing for blockages. If F05 remains, book a Hotpoint engineer. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. ## Primary evidence - Source: Hotpoint UK washing-machine error-code table - Source URL: https://www.hotpoint.co.uk/service/washing-machine-repair/error-codes - Source checked: 2026-08-17 - Procedure verified: 2026-08-17 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.