# Hotpoint Washing machine F06 error Canonical page: https://getfixfault.com/guides/hotpoint-washing-machine-f06-uk-official-code AI-readable URL: https://getfixfault.com/guides/hotpoint-washing-machine-f06-uk-official-code.txt Last reviewed: 2026-08-17 ## Direct answer Hotpoint Washing machine F06: a door-lock fault that can prevent the door closing or the cycle starting. This interpretation applies to Hotpoint washing-machine models covered by the linked UK error-code table in United Kingdom / English. ## Exact scope - Brand: Hotpoint - Appliance: Washing machine - Error code or indicator: F06 - Model scope: Hotpoint washing-machine models covered by the linked UK error-code table - Region: United Kingdom / English ## What users may observe - F06 is shown on the Hotpoint washing machine display, indicator, or connected app - The published condition is: a door-lock fault that can prevent the door closing or the cycle starting - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when F06 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a door-lock fault that can prevent the door closing or the cycle starting - F06 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to Hotpoint washing-machine models covered by the linked UK error-code table ## Verified diagnosis - Photograph the complete F06 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Hotpoint washing-machine models covered by the linked UK error-code table - Confirm that the observed condition matches the published meaning: a door-lock fault that can prevent the door closing or the cycle starting - Published check — Check the accessible door-lock area for an obstruction - Published check — If the door still will not close or F06 remains, stop and book a Hotpoint engineer - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F06 remains, stop and move to exact-model diagnosis - Published check — If F06 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F06 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Check the accessible door-lock area for an obstruction - If the door still will not close or F06 remains, stop and book a Hotpoint engineer - If F06 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F06 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow only the official Hotpoint instructions for the linked United Kingdom appliance table. Check the accessible door-lock area for an obstruction. If the door still will not close or F06 remains, stop and book a Hotpoint engineer. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. ## Primary evidence - Source: Hotpoint UK washing-machine error-code table - Source URL: https://www.hotpoint.co.uk/service/washing-machine-repair/error-codes - Source checked: 2026-08-17 - Procedure verified: 2026-08-17 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.