# LG washer dE / dE1 / E01 code Canonical page: https://getfixfault.com/guides/lg-washer-de-de1-e01-code AI-readable URL: https://getfixfault.com/guides/lg-washer-de-de1-e01-code.txt Last reviewed: 2026-08-03 ## Direct answer LG Washing machine dE / dE1 / E01: Door is not closed correctly. This interpretation applies to LG washing-machine models listed by the linked official code table in US / English. ## Exact scope - Brand: LG - Appliance: Washing machine - Error code or indicator: dE / dE1 / E01 - Model scope: LG washing-machine models listed by the linked official code table - Region: US / English ## What users may observe - The door is closed but the washer does not confirm that it is latched - The cycle will not start or pauses immediately - Laundry may be visible between the glass and rubber gasket ## Causes or fault boundaries - Door is not closed correctly ## Verified diagnosis - Photograph the complete dE / dE1 / E01 display before changing controls or removing power - Confirm that the full model number is covered by this scope: LG washing-machine models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Door is not closed correctly - Check for laundry caught between the door and rubber gasket - Open and re-close the door - If the code remains, power the washer off, unplug it or switch off its breaker, hold Start/Pause for 5 seconds, restore power, and try once - Arrange LG service if the code persists - Published check — Remove laundry only from the door/gasket area - Published check — Close the door normally without forcing the latch - Published check — Perform LG's one reset procedure ## Evidence-backed actions - Remove laundry only from the door/gasket area - Close the door normally without forcing the latch - Perform LG's one reset procedure - Run one short cycle - Stop and arrange service if the door will not lock or the code returns - Give service the dE / dE1 / E01 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Pause the cycle before inspection. Water may be hot; use the model manual before opening a user-accessible drain filter. ## Primary evidence - Source: LG US front-load washer error codes - Source URL: https://www.lg.com/us/support/help-library/lg-front-load-washer-error-code-list-CT10000010-20155069413456 - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.