# Maytag Refrigerator PO error Canonical page: https://getfixfault.com/guides/maytag-refrigerator-po-official-code AI-readable URL: https://getfixfault.com/guides/maytag-refrigerator-po-official-code.txt Last reviewed: 2026-08-11 ## Direct answer Maytag Refrigerator PO: a power-outage indicator after the freezer temperature rose. This interpretation applies to Maytag full-size refrigerator models covered by the linked Maytag Product Help article in United States / English. ## Exact scope - Brand: Maytag - Appliance: Refrigerator - Error code or indicator: PO - Model scope: Maytag full-size refrigerator models covered by the linked Maytag Product Help article - Region: United States / English ## What users may observe - PO is shown on the Maytag refrigerator display, indicator, or connected app - The published condition is: a power-outage indicator after the freezer temperature rose - The measured temperature condition does not match the operating range represented by PO - The important observation is when PO appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a power-outage indicator after the freezer temperature rose - PO identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Maytag full-size refrigerator models covered by the linked Maytag Product Help article ## Verified diagnosis - Photograph the complete PO display before changing controls or removing power - Confirm that the full model number is covered by this scope: Maytag full-size refrigerator models covered by the linked Maytag Product Help article - Confirm that the observed condition matches the published meaning: a power-outage indicator after the freezer temperature rose - Published check — Acknowledge PO using the refrigerator's Confirm/Measured Fill control as Maytag describes, then verify that cooling resumes - Published check — Arrange service if temperature does not recover - Stop at the published service boundary after these actions - do not add a restart or test cycle that Maytag does not specify for PO - Published check — Give service the PO photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Maytag does not specify for PO ## Evidence-backed actions - Acknowledge PO using the refrigerator's Confirm/Measured Fill control as Maytag describes, then verify that cooling resumes - Arrange service if temperature does not recover - Give service the PO photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact Maytag model instructions. Acknowledge PO using the refrigerator's Confirm/Measured Fill control as Maytag describes, then verify that cooling resumes. Arrange service if temperature does not recover. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Maytag official refrigerator support - Source URL: https://producthelp.maytag.com/Refrigeration/Full-size_Refrigerators/French_Door_Bottom_Freezer_Refrigerator/Control_Concerns/Error_Codes%2C_Blinking%2C_Flashing_Lights/PO_Error_Code_-_Refrigerator - Source checked: 2026-08-11 - Procedure verified: 2026-08-11 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.