# Maytag Refrigerator temperature-alarm error Canonical page: https://getfixfault.com/guides/maytag-refrigerator-temperature-alarm-official-code AI-readable URL: https://getfixfault.com/guides/maytag-refrigerator-temperature-alarm-official-code.txt Last reviewed: 2026-08-11 ## Direct answer Maytag Refrigerator temperature-alarm: an over-temperature alarm. This interpretation applies to Maytag full-size refrigerator models covered by the linked Maytag Product Help article in United States / English. ## Exact scope - Brand: Maytag - Appliance: Refrigerator - Error code or indicator: temperature-alarm - Model scope: Maytag full-size refrigerator models covered by the linked Maytag Product Help article - Region: United States / English ## What users may observe - temperature-alarm is shown on the Maytag refrigerator display, indicator, or connected app - The published condition is: an over-temperature alarm - The measured temperature condition does not match the operating range represented by temperature-alarm - The important observation is when temperature-alarm appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — an over-temperature alarm - temperature-alarm identifies the temperature condition but does not alone prove a sensor, airflow, heater, refrigerant, wiring, or control fault - Model boundary — apply this interpretation only to Maytag full-size refrigerator models covered by the linked Maytag Product Help article ## Verified diagnosis - Photograph the complete temperature-alarm display before changing controls or removing power - Confirm that the full model number is covered by this scope: Maytag full-size refrigerator models covered by the linked Maytag Product Help article - Confirm that the observed condition matches the published meaning: an over-temperature alarm - Published check — Check that the doors close and cooling is enabled, then monitor the refrigerator and freezer temperatures - Published check — Arrange service if temperatures do not return to normal - Stop at the published service boundary after these actions - do not add a restart or test cycle that Maytag does not specify for temperature-alarm - Published check — Give service the temperature-alarm photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Maytag does not specify for temperature-alarm ## Evidence-backed actions - Check that the doors close and cooling is enabled, then monitor the refrigerator and freezer temperatures - Arrange service if temperatures do not return to normal - Give service the temperature-alarm photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact Maytag model instructions. Check that the doors close and cooling is enabled, then monitor the refrigerator and freezer temperatures. Arrange service if temperatures do not return to normal. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Maytag official refrigerator support - Source URL: https://producthelp.maytag.com/Refrigeration/Full-size_Refrigerators/French_Door_Bottom_Freezer_Refrigerator/Control_Concerns/Error_Codes%2C_Blinking%2C_Flashing_Lights/Temperature_Alarm_-_Refrigerator - Source checked: 2026-08-11 - Procedure verified: 2026-08-11 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.