# Maytag Washing machine Ld error Canonical page: https://getfixfault.com/guides/maytag-washing-machine-ld-official-code AI-readable URL: https://getfixfault.com/guides/maytag-washing-machine-ld-official-code.txt Last reviewed: 2026-08-10 ## Direct answer Maytag Washing machine Ld: a long-drain problem in the drain-pump system. This interpretation applies to Maytag top-load washer models covered by the linked Maytag Product Help article in United States / English. ## Exact scope - Brand: Maytag - Appliance: Washing machine - Error code or indicator: Ld - Model scope: Maytag top-load washer models covered by the linked Maytag Product Help article - Region: United States / English ## What users may observe - Ld is shown on the Maytag washing machine display, indicator, or connected app - The published condition is: a long-drain problem in the drain-pump system - Water or condensate does not leave through the documented drain path as expected while Ld is active - The important observation is when Ld appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — a long-drain problem in the drain-pump system - Ld does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Maytag top-load washer models covered by the linked Maytag Product Help article ## Verified diagnosis - Photograph the complete Ld display before changing controls or removing power - Confirm that the full model number is covered by this scope: Maytag top-load washer models covered by the linked Maytag Product Help article - Confirm that the observed condition matches the published meaning: a long-drain problem in the drain-pump system - Published check — Check that the drain hose is not kinked or clogged, is installed no more than about 4.5 inches into the standpipe, and ends above the floor height specified by Maytag - Published check — Arrange service if Ld returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Maytag does not specify for Ld - Published check — Give service the Ld photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Maytag does not specify for Ld ## Evidence-backed actions - Check that the drain hose is not kinked or clogged, is installed no more than about 4.5 inches into the standpipe, and ends above the floor height specified by Maytag - Arrange service if Ld returns - Give service the Ld photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact Maytag model instructions. Check that the drain hose is not kinked or clogged, is installed no more than about 4.5 inches into the standpipe, and ends above the floor height specified by Maytag. Arrange service if Ld returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Maytag official washing machine support - Source URL: https://producthelp.maytag.com/Laundry/Washers/Top_Load_Washer/Error_Codes_or_Flashing_Lights/Other_Error_Codes/Ld_-_Error_Code - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.