# Midea Air conditioner P1 error Canonical page: https://getfixfault.com/guides/midea-air-conditioner-p1-portable-ac-manual-official-code AI-readable URL: https://getfixfault.com/guides/midea-air-conditioner-p1-portable-ac-manual-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Air conditioner P1: bottom water tray is full. This interpretation applies to Midea portable air-conditioner models covered by the linked official owner manual in Philippines / English manual. ## Exact scope - Brand: Midea - Appliance: Air conditioner - Error code or indicator: P1 - Model scope: Midea portable air-conditioner models covered by the linked official owner manual - Region: Philippines / English manual ## What users may observe - P1 is shown on the Midea air conditioner display, indicator, or connected app - The published condition is: bottom water tray is full - Water or condensate does not leave through the documented drain path as expected while P1 is active - The important observation is when P1 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — bottom water tray is full - P1 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Midea portable air-conditioner models covered by the linked official owner manual ## Verified diagnosis - Photograph the complete P1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea portable air-conditioner models covered by the linked official owner manual - Confirm that the observed condition matches the published meaning: bottom water tray is full - Published check — Switch the portable air conditioner off, drain the bottom tray using the official drain procedure, and arrange service if P1 repeats - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for P1 - Published check — Give service the P1 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for P1 ## Evidence-backed actions - Switch the portable air conditioner off, drain the bottom tray using the official drain procedure, and arrange service if P1 repeats - Give service the P1 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Switch the portable air conditioner off, drain the bottom tray using the official drain procedure, and arrange service if P1 repeats. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea portable air-conditioner owner manual - Source URL: https://www.midea.com/content/dam/midea-aem/ph/product-manuals/air-conditioners/portable/Midea_RAC_Portable_Air_Conditioners.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.