# Midea Air conditioner P24 error Canonical page: https://getfixfault.com/guides/midea-air-conditioner-p24-split-ac-md26iu-023a-official-code AI-readable URL: https://getfixfault.com/guides/midea-air-conditioner-p24-split-ac-md26iu-023a-official-code.txt Last reviewed: 2026-08-24 ## Direct answer Midea Air conditioner P24: suction-pipe low-pressure abnormal rise. This interpretation applies to Midea EasyFit II MD26IU-023A air-conditioner series covered by the linked official manual in International / English HVAC manual. ## Exact scope - Brand: Midea - Appliance: Air conditioner - Error code or indicator: P24 - Model scope: Midea EasyFit II MD26IU-023A air-conditioner series covered by the linked official manual - Region: International / English HVAC manual ## What users may observe - P24 is shown on the Midea air conditioner display, indicator, or connected app - The published condition is: suction-pipe low-pressure abnormal rise - Airflow through the documented filter or vent path is restricted or the maintenance condition remains active - The important observation is when P24 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — suction-pipe low-pressure abnormal rise - P24 does not by itself prove a fan, heater, sensor, or control failure before the accessible airflow path is checked - Model boundary — apply this interpretation only to Midea EasyFit II MD26IU-023A air-conditioner series covered by the linked official manual ## Verified diagnosis - Photograph the complete P24 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea EasyFit II MD26IU-023A air-conditioner series covered by the linked official manual - Confirm that the observed condition matches the published meaning: suction-pipe low-pressure abnormal rise - Published check — Stop repeated testing, record P24 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for P24 - Published check — Give service the P24 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for P24 ## Evidence-backed actions - Stop repeated testing, record P24 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the P24 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record P24 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea EasyFit II MD26IU-023A official installation and owner manual - Source URL: https://mbt.midea.com/content/dam/midea-aem/mbt/Easyfit%E2%85%A1-MD26IU-023A-EN.pdf - Source checked: 2026-08-24 - Procedure verified: 2026-08-24 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.