# Midea Cooktop E1/E2 error Canonical page: https://getfixfault.com/guides/midea-cooktop-e1-e2-induction-hob-mc-if7040b2c-a-official-code AI-readable URL: https://getfixfault.com/guides/midea-cooktop-e1-e2-induction-hob-mc-if7040b2c-a-official-code.txt Last reviewed: 2026-08-26 ## Direct answer Midea Cooktop E1/E2: abnormal supply voltage. This interpretation applies to Midea MC-IF7040B2C-A induction hob covered by the linked official manual in Germany / English manual. ## Exact scope - Brand: Midea - Appliance: Cooktop - Error code or indicator: E1/E2 - Model scope: Midea MC-IF7040B2C-A induction hob covered by the linked official manual - Region: Germany / English manual ## What users may observe - E1/E2 is shown on the Midea cooktop display, indicator, or connected app - The published condition is: abnormal supply voltage - The appliance has reached the manufacturer-defined stop or service condition associated with E1/E2 - The important observation is when E1/E2 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — abnormal supply voltage - E1/E2 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Midea MC-IF7040B2C-A induction hob covered by the linked official manual ## Verified diagnosis - Photograph the complete E1/E2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MC-IF7040B2C-A induction hob covered by the linked official manual - Confirm that the observed condition matches the published meaning: abnormal supply voltage - Published check — Switch the hob off, have the supply checked by a qualified electrician, and restart only after the supply is confirmed normal - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for E1/E2 - Published check — Give service the E1/E2 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for E1/E2 ## Evidence-backed actions - Switch the hob off, have the supply checked by a qualified electrician, and restart only after the supply is confirmed normal - Give service the E1/E2 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Switch the hob off, have the supply checked by a qualified electrician, and restart only after the supply is confirmed normal. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MC-IF7040B2C-A official induction-hob manual - Source URL: https://www.midea.com/content/dam/midea-aem/de/kochen-backen/kochfelder/mc-if7040b2c-a/IM-MIDEA-MC-IF7040B2C-A-MC-IF7040B2C-A-0502-20240402%E6%94%B9-.pdf - Source checked: 2026-08-26 - Procedure verified: 2026-08-26 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.