# Midea Dehumidifier P2 error Canonical page: https://getfixfault.com/guides/midea-dehumidifier-p2-dehumidifier-mad35s1qwt-official-code AI-readable URL: https://getfixfault.com/guides/midea-dehumidifier-p2-dehumidifier-mad35s1qwt-official-code.txt Last reviewed: 2026-08-22 ## Direct answer Midea Dehumidifier P2: water bucket is full or not seated correctly. This interpretation applies to Midea MAD35S1QWT cube dehumidifier covered by the linked official manual in United States / English manual. ## Exact scope - Brand: Midea - Appliance: Dehumidifier - Error code or indicator: P2 - Model scope: Midea MAD35S1QWT cube dehumidifier covered by the linked official manual - Region: United States / English manual ## What users may observe - P2 is shown on the Midea dehumidifier display, indicator, or connected app - The published condition is: water bucket is full or not seated correctly - The affected function behaves as described by the manufacturer while P2 is present - The important observation is when P2 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water bucket is full or not seated correctly - P2 identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Midea MAD35S1QWT cube dehumidifier covered by the linked official manual ## Verified diagnosis - Photograph the complete P2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MAD35S1QWT cube dehumidifier covered by the linked official manual - Confirm that the observed condition matches the published meaning: water bucket is full or not seated correctly - Published check — Stop repeated testing, record P2 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for P2 - Published check — Give service the P2 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for P2 ## Evidence-backed actions - Stop repeated testing, record P2 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the P2 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Stop repeated testing, record P2 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MAD35S1QWT cube-dehumidifier official manual - Source URL: https://www.midea.com/content/dam/midea-aem/us/air-conditioners/dehumidifiers/35-pint-cube-dehumidifier-mad35s1qwt/cube-dehumidifier-user-manual.pdf - Source checked: 2026-08-22 - Procedure verified: 2026-08-22 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.