# Midea Dishwasher E3 error Canonical page: https://getfixfault.com/guides/midea-dishwasher-e3-dishwasher-mdweb1403qb-wu-official-code AI-readable URL: https://getfixfault.com/guides/midea-dishwasher-e3-dishwasher-mdweb1403qb-wu-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Dishwasher E3: required wash temperature is not reached. This interpretation applies to Midea WQP12-WU7703Q (MDWEB1403QB-WU) dishwasher covered by the linked official manual in Europe / English manual. ## Exact scope - Brand: Midea - Appliance: Dishwasher - Error code or indicator: E3 - Model scope: Midea WQP12-WU7703Q (MDWEB1403QB-WU) dishwasher covered by the linked official manual - Region: Europe / English manual ## What users may observe - E3 is shown on the Midea dishwasher display, indicator, or connected app - The published condition is: required wash temperature is not reached - The requested heating function is stopped or limited while the documented heating-system condition is active - The important observation is when E3 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — required wash temperature is not reached - E3 identifies a heating-system condition but does not alone prove the heater, relay, sensor, circulation path, wiring, or control failed - Model boundary — apply this interpretation only to Midea WQP12-WU7703Q (MDWEB1403QB-WU) dishwasher covered by the linked official manual ## Verified diagnosis - Photograph the complete E3 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea WQP12-WU7703Q (MDWEB1403QB-WU) dishwasher covered by the linked official manual - Confirm that the observed condition matches the published meaning: required wash temperature is not reached - Published check — Stop repeated cycles, record E3 and the model, and arrange Midea service - Published check — do not test the heater live - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for E3 - Published check — Give service the E3 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for E3 ## Evidence-backed actions - Stop repeated cycles, record E3 and the model, and arrange Midea service - do not test the heater live - Give service the E3 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated cycles, record E3 and the model, and arrange Midea service; do not test the heater live. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MDWEB1403QB-WU official dishwasher manual - Source URL: https://www.midea.com/content/dam/midea-aem/fr/user-manual/kwh/dishwasher/new/MDWEB1403QB-WU-Manual.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.