# Midea Dishwasher E4 error Canonical page: https://getfixfault.com/guides/midea-dishwasher-e4-dishwasher-mfd60s131x-official-code AI-readable URL: https://getfixfault.com/guides/midea-dishwasher-e4-dishwasher-mfd60s131x-official-code.txt Last reviewed: 2026-08-26 ## Direct answer Midea Dishwasher E4: overflow detected. This interpretation applies to Midea MFD60S131X dishwasher covered by the linked official user manual in Italy / Italian manual. ## Exact scope - Brand: Midea - Appliance: Dishwasher - Error code or indicator: E4 - Model scope: Midea MFD60S131X dishwasher covered by the linked official user manual - Region: Italy / Italian manual ## What users may observe - E4 is shown on the Midea dishwasher display, indicator, or connected app - The published condition is: overflow detected - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when E4 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — overflow detected - E4 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Midea MFD60S131X dishwasher covered by the linked official user manual ## Verified diagnosis - Photograph the complete E4 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MFD60S131X dishwasher covered by the linked official user manual - Confirm that the observed condition matches the published meaning: overflow detected - Published check — Stop repeated testing, record E4 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for E4 - Published check — Give service the E4 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for E4 ## Evidence-backed actions - Stop repeated testing, record E4 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the E4 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record E4 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MFD60S131X official dishwasher user manual - Source URL: https://www.midea.com/content/dam/midea-aem/it/lavastoviglie/mfd60s131x-it/documents/Manuale-Utente-classe-E.pdf - Source checked: 2026-08-26 - Procedure verified: 2026-08-26 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.