# Midea Freezer Both flashing - defrost error Canonical page: https://getfixfault.com/guides/midea-freezer-both-flashing-defrost-freezer-mru21b2asl-official-code AI-readable URL: https://getfixfault.com/guides/midea-freezer-both-flashing-defrost-freezer-mru21b2asl-official-code.txt Last reviewed: 2026-08-22 ## Direct answer Midea Freezer Both flashing - defrost: defrost-sensor fault. This interpretation applies to Midea MRU21B2ASL freezer covered by the linked official manual in Canada / English manual. ## Exact scope - Brand: Midea - Appliance: Freezer - Error code or indicator: Both flashing - defrost - Model scope: Midea MRU21B2ASL freezer covered by the linked official manual - Region: Canada / English manual ## What users may observe - Both flashing - defrost is shown on the Midea freezer display, indicator, or connected app - The published condition is: defrost-sensor fault - The control cannot confirm the documented measured condition or sensor reference represented by Both flashing - defrost - The important observation is when Both flashing - defrost appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — defrost-sensor fault - Both flashing - defrost identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Midea MRU21B2ASL freezer covered by the linked official manual ## Verified diagnosis - Photograph the complete Both flashing - defrost display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MRU21B2ASL freezer covered by the linked official manual - Confirm that the observed condition matches the published meaning: defrost-sensor fault - Published check — Stop repeated testing, record Both flashing - defrost and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for Both flashing - defrost - Published check — Give service the Both flashing - defrost photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for Both flashing - defrost ## Evidence-backed actions - Stop repeated testing, record Both flashing - defrost and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the Both flashing - defrost photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record Both flashing - defrost and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MRU21B2ASL official freezer manual - Source URL: https://www.midea.com/content/dam/midea-aem/ca/resized-600-by-600/mru21b2asl/User-manual-for-MRU21B2ASL.pdf - Source checked: 2026-08-22 - Procedure verified: 2026-08-22 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.