# Midea Refrigerator H7 error Canonical page: https://getfixfault.com/guides/midea-refrigerator-h7-fridge-mrf27i6bst-official-code AI-readable URL: https://getfixfault.com/guides/midea-refrigerator-h7-fridge-mrf27i6bst-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Refrigerator H7: large ice-maker ice-tray sensor fault. This interpretation applies to Midea MRF27I6BST and MRF32I6BST refrigerator families covered by the linked official manual in Canada / English manual. ## Exact scope - Brand: Midea - Appliance: Refrigerator - Error code or indicator: H7 - Model scope: Midea MRF27I6BST and MRF32I6BST refrigerator families covered by the linked official manual - Region: Canada / English manual ## What users may observe - H7 is shown on the Midea refrigerator display, indicator, or connected app - The published condition is: large ice-maker ice-tray sensor fault - The control cannot confirm the documented measured condition or sensor reference represented by H7 - The important observation is when H7 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — large ice-maker ice-tray sensor fault - H7 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Midea MRF27I6BST and MRF32I6BST refrigerator families covered by the linked official manual ## Verified diagnosis - Photograph the complete H7 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MRF27I6BST and MRF32I6BST refrigerator families covered by the linked official manual - Confirm that the observed condition matches the published meaning: large ice-maker ice-tray sensor fault - Published check — Stop repeated testing, record H7 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for H7 - Published check — Give service the H7 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for H7 ## Evidence-backed actions - Stop repeated testing, record H7 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the H7 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record H7 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MRF27I6BST official refrigerator manual - Source URL: https://www.midea.com/content/dam/midea-aem/ca/1200-x-1200-resized/mrf27i6bst/User-Manual-MRF27I6BST.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.