# Midea Refrigerator LED 1 + LED 2 error Canonical page: https://getfixfault.com/guides/midea-refrigerator-led-1-led-2-refrigerator-mrb19b7aww-official-code AI-readable URL: https://getfixfault.com/guides/midea-refrigerator-led-1-led-2-refrigerator-mrb19b7aww-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Refrigerator LED 1 + LED 2: refrigerator temperature-sensor fault. This interpretation applies to Midea MRB19B7AWW and MRB19B7AST bottom-mount refrigerator models covered by the linked official manual in Canada / English manual. ## Exact scope - Brand: Midea - Appliance: Refrigerator - Error code or indicator: LED 1 + LED 2 - Model scope: Midea MRB19B7AWW and MRB19B7AST bottom-mount refrigerator models covered by the linked official manual - Region: Canada / English manual ## What users may observe - LED 1 + LED 2 is shown on the Midea refrigerator display, indicator, or connected app - The published condition is: refrigerator temperature-sensor fault - The control cannot confirm the documented measured condition or sensor reference represented by LED 1 + LED 2 - The important observation is when LED 1 + LED 2 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — refrigerator temperature-sensor fault - LED 1 + LED 2 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Midea MRB19B7AWW and MRB19B7AST bottom-mount refrigerator models covered by the linked official manual ## Verified diagnosis - Photograph the complete LED 1 + LED 2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MRB19B7AWW and MRB19B7AST bottom-mount refrigerator models covered by the linked official manual - Confirm that the observed condition matches the published meaning: refrigerator temperature-sensor fault - Published check — Stop repeated testing, record LED 1 + LED 2 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for LED 1 + LED 2 - Published check — Give service the LED 1 + LED 2 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for LED 1 + LED 2 ## Evidence-backed actions - Stop repeated testing, record LED 1 + LED 2 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the LED 1 + LED 2 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record LED 1 + LED 2 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MRB19B7AWW/MRB19B7AST official refrigerator manual - Source URL: https://www.midea.com/content/dam/midea-aem/ca/refrigerators/18-7-cu-ft-bottom-mount-freezer-refrigerator-mrb19b7aww/MRB19B7AWW%20MRB19B7AST%20_Manual.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.