# Midea Washing machine E21 error Canonical page: https://getfixfault.com/guides/midea-washing-machine-e21-washer-mlh27n5awwc-official-code AI-readable URL: https://getfixfault.com/guides/midea-washing-machine-e21-washer-mlh27n5awwc-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Washing machine E21: washer does not drain. This interpretation applies to Midea MLH27N5AWWC front-load washer covered by the linked official manual in Canada / English manual. ## Exact scope - Brand: Midea - Appliance: Washing machine - Error code or indicator: E21 - Model scope: Midea MLH27N5AWWC front-load washer covered by the linked official manual - Region: Canada / English manual ## What users may observe - E21 is shown on the Midea washing machine display, indicator, or connected app - The published condition is: washer does not drain - Water or condensate does not leave through the documented drain path as expected while E21 is active - The important observation is when E21 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — washer does not drain - E21 does not distinguish an accessible restriction, hose installation, household drain, pump, wiring, or control until the drain path is checked - Model boundary — apply this interpretation only to Midea MLH27N5AWWC front-load washer covered by the linked official manual ## Verified diagnosis - Photograph the complete E21 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MLH27N5AWWC front-load washer covered by the linked official manual - Confirm that the observed condition matches the published meaning: washer does not drain - Published check — Check the visible drain hose for blockage, restart once, and arrange service if E21 remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for E21 - Published check — Give service the E21 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for E21 ## Evidence-backed actions - Check the visible drain hose for blockage, restart once, and arrange service if E21 remains - Give service the E21 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Check the visible drain hose for blockage, restart once, and arrange service if E21 remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MLH27N5AWWC official washer manual - Source URL: https://www.midea.com/content/dam/midea-aem/ca/laundry/31-cu-ft-front-load-washer-mlh27n5awwc/Manual_MLH27N5AWWC.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.