# Midea Washing machine E33 error Canonical page: https://getfixfault.com/guides/midea-washing-machine-e33-washer-mf110w80-90-100ba10-official-code AI-readable URL: https://getfixfault.com/guides/midea-washing-machine-e33-washer-mf110w80-90-100ba10-official-code.txt Last reviewed: 2026-08-21 ## Direct answer Midea Washing machine E33: water-level sensor signal outside the normal range during the wash cycle. This interpretation applies to Midea MF110W80BA10-W, MF110W90BA10-W and MF110W100BA10-W washing-machine series covered by the linked official service manual in Netherlands / English service manual. ## Exact scope - Brand: Midea - Appliance: Washing machine - Error code or indicator: E33 - Model scope: Midea MF110W80BA10-W, MF110W90BA10-W and MF110W100BA10-W washing-machine series covered by the linked official service manual - Region: Netherlands / English service manual ## What users may observe - E33 is shown on the Midea washing machine display, indicator, or connected app - The published condition is: water-level sensor signal outside the normal range during the wash cycle - The control cannot confirm the documented measured condition or sensor reference represented by E33 - The important observation is when E33 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water-level sensor signal outside the normal range during the wash cycle - E33 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Midea MF110W80BA10-W, MF110W90BA10-W and MF110W100BA10-W washing-machine series covered by the linked official service manual ## Verified diagnosis - Photograph the complete E33 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Midea MF110W80BA10-W, MF110W90BA10-W and MF110W100BA10-W washing-machine series covered by the linked official service manual - Confirm that the observed condition matches the published meaning: water-level sensor signal outside the normal range during the wash cycle - Published check — Stop repeated testing, record E33 and the full model number, and arrange Midea service - Published check — do not open fixed panels or test live circuits - Stop at the published service boundary after these actions - do not add a restart or test cycle that Midea does not specify for E33 - Published check — Give service the E33 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Midea does not specify for E33 ## Evidence-backed actions - Stop repeated testing, record E33 and the full model number, and arrange Midea service - do not open fixed panels or test live circuits - Give service the E33 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop repeated testing, record E33 and the full model number, and arrange Midea service; do not open fixed panels or test live circuits. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Midea MF110W80/90/100BA10-W official washer service manual - Source URL: https://www.midea.com/content/dam/midea-aem/nl/nl-en/laundry/laundry/washer/mf110w80ba10-w-nl/Service-manual-MF110W80-90-100BA10-W-NL.pdf - Source checked: 2026-08-21 - Procedure verified: 2026-08-21 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.