# Miele Coffee machine F233 error Canonical page: https://getfixfault.com/guides/miele-coffee-machine-f233-official-code AI-readable URL: https://getfixfault.com/guides/miele-coffee-machine-f233-official-code.txt Last reviewed: 2026-08-09 ## Direct answer Miele Coffee machine F233: the cup rim sensor is missing, incorrectly inserted, or has lost its reference position. This interpretation applies to Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Coffee machine - Error code or indicator: F233 - Model scope: Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684 - Region: United Kingdom / English ## What users may observe - F233 is shown on the Miele coffee machine display, indicator, or connected app - The published condition is: the cup rim sensor is missing, incorrectly inserted, or has lost its reference position - The control cannot confirm the documented measured condition or sensor reference represented by F233 - The important observation is when F233 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the cup rim sensor is missing, incorrectly inserted, or has lost its reference position - F233 identifies a measured-condition or sensor path, not a completed proof that the sensor itself failed - Model boundary — apply this interpretation only to Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684 ## Verified diagnosis - Photograph the complete F233 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele CVA 7845 built-in coffee machine covered by operating instructions 00_C7F13838022E1FD080959FE8EA0C0684 - Confirm that the observed condition matches the published meaning: the cup rim sensor is missing, incorrectly inserted, or has lost its reference position - Published check — Confirm the message with OK, refit the cup rim sensor, and allow cup-rim detection to reinitialise at the next switch-on - Published check — Contact Miele Service if the message returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F233 - Published check — Give service the F233 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F233 ## Evidence-backed actions - Confirm the message with OK, refit the cup rim sensor, and allow cup-rim detection to reinitialise at the next switch-on - Contact Miele Service if the message returns - Give service the F233 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Follow the exact model manual. Confirm the message with OK, refit the cup rim sensor, and allow cup-rim detection to reinitialise at the next switch-on. Contact Miele Service if the message returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official built-in coffee-machine operating instructions - Source URL: https://media.miele.com/downloads/06/84/00_C7F13838022E1FD080959FE8EA0C0684.pdf - Source checked: 2026-08-09 - Procedure verified: 2026-08-09 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.