# Miele Dishwasher F18 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f18-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f18-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F18: technical water-inlet fault. This interpretation applies to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F18 - Model scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 - Region: United Kingdom / English ## What users may observe - F18 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: technical water-inlet fault - The affected fill stage does not receive or confirm the expected water supply while F18 is active - The important observation is when F18 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — technical water-inlet fault - F18 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 ## Verified diagnosis - Photograph the complete F18 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 - Confirm that the observed condition matches the published meaning: technical water-inlet fault - Published check — Switch the dishwasher off, close the stopcock, and contact Miele Customer Service - Published check — do not continue operating it if F18 returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F18 - Published check — Give service the F18 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F18 ## Evidence-backed actions - Switch the dishwasher off, close the stopcock, and contact Miele Customer Service - do not continue operating it if F18 returns - Give service the F18 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Switch the dishwasher off, close the stopcock, and contact Miele Customer Service; do not continue operating it if F18 returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official dishwasher operating instructions - Source URL: https://media.miele.com/downloads/5c/e2/03_96106053F20B1EECA4FBBE3A81A45CE2.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.