# Miele Dishwasher F404 / F405 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f404-f405-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f404-f405-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F404 / F405: water-inlet fault after repeated failed intake checks. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F404 / F405 - Model scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Region: United Kingdom / English ## What users may observe - F404 / F405 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: water-inlet fault after repeated failed intake checks - The affected fill stage does not receive or confirm the expected water supply while F404 / F405 is active - The important observation is when F404 / F405 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water-inlet fault after repeated failed intake checks - F404 / F405 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 ## Verified diagnosis - Photograph the complete F404 / F405 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Confirm that the observed condition matches the published meaning: water-inlet fault after repeated failed intake checks - Published check — Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once - Published check — If the fault returns, contact Miele Customer Service - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F404 / F405 - Published check — Give service the F404 / F405 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F404 / F405 ## Evidence-backed actions - Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once - If the fault returns, contact Miele Customer Service - Give service the F404 / F405 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Open the stopcock fully, switch the dishwasher off and back on, select the programme again, and press Start/Stop once. If the fault returns, contact Miele Customer Service. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official commercial dishwasher operating instructions PFD 402-407 - Source URL: https://media.miele.com/downloads/8c/38/00_96106053F20B1EDD98B149F9F4BD8C38.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.