# Miele Dishwasher F406 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f406-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f406-official-code.txt Last reviewed: 2026-08-10 ## Direct answer Miele Dishwasher F406: water flow rate insufficient. This interpretation applies to Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 in United States / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F406 - Model scope: Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 - Region: United States / English ## What users may observe - F406 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: water flow rate insufficient - The appliance has reached the manufacturer-defined stop or service condition associated with F406 - The important observation is when F406 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water flow rate insufficient - F406 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 ## Verified diagnosis - Photograph the complete F406 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 - Confirm that the observed condition matches the published meaning: water flow rate insufficient - Published check — Check that the stopcocks are fully open and the inlet filters are clean - Published check — have flow pressure checked by a qualified person if required - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F406 remains, stop and move to exact-model diagnosis - Published check — If F406 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F406 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Check that the stopcocks are fully open and the inlet filters are clean - have flow pressure checked by a qualified person if required - If F406 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F406 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Do not work on live or pressurised systems. ## Primary evidence - Source: Miele official laboratory-dishwasher operating instructions - Source URL: https://media.miele.com/downloads/91/24/01_F6154D09FD151EDCBFA4D957C0C09124.pdf - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.