# Miele Dishwasher F413 / F414 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f413-f414-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f413-f414-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F413 / F414: water-inlet fault caused by flow pressure that is too high. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F413 / F414 - Model scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Region: United Kingdom / English ## What users may observe - F413 / F414 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: water-inlet fault caused by flow pressure that is too high - The affected fill stage does not receive or confirm the expected water supply while F413 / F414 is active - The important observation is when F413 / F414 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water-inlet fault caused by flow pressure that is too high - F413 / F414 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 ## Verified diagnosis - Photograph the complete F413 / F414 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Confirm that the observed condition matches the published meaning: water-inlet fault caused by flow pressure that is too high - Published check — Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data - Published check — Contact Miele Customer Service for advice - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F413 / F414 - Published check — Give service the F413 / F414 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F413 / F414 ## Evidence-backed actions - Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data - Contact Miele Customer Service for advice - Give service the F413 / F414 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Stop using the dishwasher and have the water connection and flow pressure checked against the manual's technical data. Contact Miele Customer Service for advice. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official commercial dishwasher operating instructions PFD 402-407 - Source URL: https://media.miele.com/downloads/8c/38/00_96106053F20B1EDD98B149F9F4BD8C38.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.