# Miele Dishwasher F438 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f438-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f438-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F438: the comfort door lock is obstructed by a heavy object in front of the machine. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F438 - Model scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Region: United Kingdom / English ## What users may observe - F438 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: the comfort door lock is obstructed by a heavy object in front of the machine - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when F438 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the comfort door lock is obstructed by a heavy object in front of the machine - F438 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 ## Verified diagnosis - Photograph the complete F438 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Confirm that the observed condition matches the published meaning: the comfort door lock is obstructed by a heavy object in front of the machine - Published check — Remove heavy objects from in front of the dishwasher and try the door once - Published check — Contact Miele Service if the automatic opening fault remains - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F438 - Published check — Give service the F438 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F438 ## Evidence-backed actions - Remove heavy objects from in front of the dishwasher and try the door once - Contact Miele Service if the automatic opening fault remains - Give service the F438 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Remove heavy objects from in front of the dishwasher and try the door once. Contact Miele Service if the automatic opening fault remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official commercial dishwasher operating instructions PFD 402-407 - Source URL: https://media.miele.com/downloads/8c/38/00_96106053F20B1EDD98B149F9F4BD8C38.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.