# Miele Dishwasher F440 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f440-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f440-official-code.txt Last reviewed: 2026-08-10 ## Direct answer Miele Dishwasher F440: base float switch was not activated or may be blocked. This interpretation applies to Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 in United States / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F440 - Model scope: Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 - Region: United States / English ## What users may observe - F440 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: base float switch was not activated or may be blocked - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when F440 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — base float switch was not activated or may be blocked - F440 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 ## Verified diagnosis - Photograph the complete F440 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele laboratory glassware washers covered by operating instructions 01_F6154D09FD151EDCBFA4D957C0C09124 - Confirm that the observed condition matches the published meaning: base float switch was not activated or may be blocked - Published check — Switch the machine off, remove the filter combination, and check only that the accessible float switch moves freely - Published check — Contact Miele Service if the fault returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F440 - Published check — Give service the F440 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F440 ## Evidence-backed actions - Switch the machine off, remove the filter combination, and check only that the accessible float switch moves freely - Contact Miele Service if the fault returns - Give service the F440 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Do not work on live or pressurised systems. ## Primary evidence - Source: Miele official laboratory-dishwasher operating instructions - Source URL: https://media.miele.com/downloads/91/24/01_F6154D09FD151EDCBFA4D957C0C09124.pdf - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.