# Miele Dishwasher F553 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f553-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f553-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F553: the salt-container flap has opened during a programme. This interpretation applies to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F553 - Model scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Region: United Kingdom / English ## What users may observe - F553 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: the salt-container flap has opened during a programme - The specified consumable level or setting remains outside the documented state - The important observation is when F553 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the salt-container flap has opened during a programme - F553 does not identify an internal failed part while the documented consumable or setting needs attention - Model boundary — apply this interpretation only to Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 ## Verified diagnosis - Photograph the complete F553 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele PFD 402-407 commercial dishwasher models covered by official operating instructions 00_96106053F20B1EDD98B149F9F4BD8C38 - Confirm that the observed condition matches the published meaning: the salt-container flap has opened during a programme - Published check — Open the door carefully because hot steam and process chemicals may escape, close the salt-container flap correctly, and contact Miele if the message returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F553 remains, stop and move to exact-model diagnosis - Published check — If F553 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F553 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Open the door carefully because hot steam and process chemicals may escape, close the salt-container flap correctly, and contact Miele if the message returns - If F553 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F553 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Open the door carefully because hot steam and process chemicals may escape, close the salt-container flap correctly, and contact Miele if the message returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official commercial dishwasher operating instructions PFD 402-407 - Source URL: https://media.miele.com/downloads/8c/38/00_96106053F20B1EDD98B149F9F4BD8C38.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.