# Miele Dishwasher F78 error Canonical page: https://getfixfault.com/guides/miele-dishwasher-f78-official-code AI-readable URL: https://getfixfault.com/guides/miele-dishwasher-f78-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Dishwasher F78: circulation-pump fault. This interpretation applies to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 in United Kingdom / English. ## Exact scope - Brand: Miele - Appliance: Dishwasher - Error code or indicator: F78 - Model scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 - Region: United Kingdom / English ## What users may observe - F78 is shown on the Miele dishwasher display, indicator, or connected app - The published condition is: circulation-pump fault - The documented fan or circulation function is not confirmed while F78 is active - The important observation is when F78 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — circulation-pump fault - F78 identifies the circulation path but does not alone prove the fan motor, obstruction, wiring, sensor, or control failed - Model boundary — apply this interpretation only to Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 ## Verified diagnosis - Photograph the complete F78 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele dishwasher models covered by official operating instructions 03_96106053F20B1EECA4FBBE3A81A45CE2 - Confirm that the observed condition matches the published meaning: circulation-pump fault - Published check — Switch the dishwasher off, restart it once, and close the stopcock if F78 returns - Published check — contact Miele Service rather than opening the pump or electrical system - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F78 - Published check — Give service the F78 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F78 ## Evidence-backed actions - Switch the dishwasher off, restart it once, and close the stopcock if F78 returns - contact Miele Service rather than opening the pump or electrical system - Give service the F78 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Switch the dishwasher off, restart it once, and close the stopcock if F78 returns; contact Miele Service rather than opening the pump or electrical system. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official dishwasher operating instructions - Source URL: https://media.miele.com/downloads/5c/e2/03_96106053F20B1EECA4FBBE3A81A45CE2.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.