# Miele Washing machine F10 error Canonical page: https://getfixfault.com/guides/miele-washing-machine-f10-official-code AI-readable URL: https://getfixfault.com/guides/miele-washing-machine-f10-official-code.txt Last reviewed: 2026-08-26 ## Direct answer Miele Washing machine F10: water inlet fault. This interpretation applies to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 in Australia / New Zealand / English. ## Exact scope - Brand: Miele - Appliance: Washing machine - Error code or indicator: F10 - Model scope: Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 - Region: Australia / New Zealand / English ## What users may observe - F10 is shown on the Miele washing machine display, indicator, or connected app - The published condition is: water inlet fault - The affected fill stage does not receive or confirm the expected water supply while F10 is active - The important observation is when F10 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — water inlet fault - F10 does not distinguish household supply, hose, accessible screen, inlet hardware, wiring, or control until the listed checks are completed - Model boundary — apply this interpretation only to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 ## Verified diagnosis - Photograph the complete F10 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 - Confirm that the observed condition matches the published meaning: water inlet fault - Published check — Open the stopcock, check the inlet hose for kinks, and confirm adequate pressure as Miele describes - Published check — contact Miele if F10 returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F10 remains, stop and move to exact-model diagnosis - Published check — If F10 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F10 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Open the stopcock, check the inlet hose for kinks, and confirm adequate pressure as Miele describes - contact Miele if F10 returns - If F10 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F10 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Open the stopcock, check the inlet hose for kinks, and confirm adequate pressure as Miele describes; contact Miele if F10 returns. Stop if there is water, heat, smoke, a burning smell, or unsafe electrical behavior. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official washing-machine operating instructions - Source URL: https://media.miele.com/downloads/0f/08/00_C7F12828C92D1FD09FE4688C7B2B0F08.pdf - Source checked: 2026-08-26 - Procedure verified: 2026-08-26 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.