# Miele Washing machine F35 error Canonical page: https://getfixfault.com/guides/miele-washing-machine-f35-official-code AI-readable URL: https://getfixfault.com/guides/miele-washing-machine-f35-official-code.txt Last reviewed: 2026-08-10 ## Direct answer Miele Washing machine F35: door lock has jammed. This interpretation applies to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 in Australia / New Zealand / English. ## Exact scope - Brand: Miele - Appliance: Washing machine - Error code or indicator: F35 - Model scope: Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 - Region: Australia / New Zealand / English ## What users may observe - F35 is shown on the Miele washing machine display, indicator, or connected app - The published condition is: door lock has jammed - The appliance cannot confirm the documented door, lid, latch, or lock state - The important observation is when F35 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — door lock has jammed - F35 does not distinguish an obstruction, seal position, latch, lock, wiring, or control until the external closure checks are complete - Model boundary — apply this interpretation only to Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 ## Verified diagnosis - Photograph the complete F35 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele washing-machine models covered by operating instructions 00_C7F12828C92D1FD09FE4688C7B2B0F08 - Confirm that the observed condition matches the published meaning: door lock has jammed - Published check — Switch the washing machine off and on once - Published check — If F35 returns, contact Miele Customer Service and do not force the door - Stop at the published service boundary after these actions - do not add a restart or test cycle that Miele does not specify for F35 - Published check — Give service the F35 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Miele does not specify for F35 ## Evidence-backed actions - Switch the washing machine off and on once - If F35 returns, contact Miele Customer Service and do not force the door - Give service the F35 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Do not work on live or pressurised systems. ## Primary evidence - Source: Miele official washing-machine operating instructions - Source URL: https://media.miele.com/downloads/0f/08/00_C7F12828C92D1FD09FE4688C7B2B0F08.pdf - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.