# Miele Washing machine F373 error Canonical page: https://getfixfault.com/guides/miele-washing-machine-f373-official-code AI-readable URL: https://getfixfault.com/guides/miele-washing-machine-f373-official-code.txt Last reviewed: 2026-08-08 ## Direct answer Miele Washing machine F373: leak detected at the drain filter. This interpretation applies to Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55 in United States / English. ## Exact scope - Brand: Miele - Appliance: Washing machine - Error code or indicator: F373 - Model scope: Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55 - Region: United States / English ## What users may observe - F373 is shown on the Miele washing machine display, indicator, or connected app - The published condition is: leak detected at the drain filter - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when F373 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — leak detected at the drain filter - F373 confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55 ## Verified diagnosis - Photograph the complete F373 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Miele washing-machine models covered by official operating instructions 00_C7F1383898B61FD09FE58C6DD9FF8F55 - Confirm that the observed condition matches the published meaning: leak detected at the drain filter - Published check — Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes - Published check — contact Miele if F373 returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check - if F373 remains, stop and move to exact-model diagnosis - Published check — If F373 returns after the listed action, do not repeat the same correction indefinitely - Published check — continue with exact-model diagnosis - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if F373 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes - contact Miele if F373 returns - If F373 returns after the listed action, do not repeat the same correction indefinitely - continue with exact-model diagnosis - If F373 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Switch the appliance off, check that the drain filter is correctly seated and tighten it as the manual describes; contact Miele if F373 returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: Miele official washing-machine operating instructions - Source URL: https://media.miele.com/downloads/8f/55/00_C7F1383898B61FD09FE58C6DD9FF8F55.pdf - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.