# Nespresso Lattissima Touch descaling light stays orange Canonical page: https://getfixfault.com/guides/nespresso-lattissima-touch-orange-descaling-after-cycle AI-readable URL: https://getfixfault.com/guides/nespresso-lattissima-touch-orange-descaling-after-cycle.txt Last reviewed: 2026-08-08 ## Direct answer Nespresso Coffee machine Descaling light orange after cycle — Lattissima Touch: The water-hardness setting may still be requesting descaling. This interpretation applies to Nespresso Lattissima Touch machines covered by the Denmark support FAQ in Denmark / English. ## Exact scope - Brand: Nespresso - Appliance: Coffee machine - Error code or indicator: Descaling light orange after cycle — Lattissima Touch - Model scope: Nespresso Lattissima Touch machines covered by the Denmark support FAQ - Region: Denmark / English ## What users may observe - Descaling light orange after cycle — Lattissima Touch is shown on the Nespresso coffee machine display, indicator, or connected app - The published condition is: The water-hardness setting may still be requesting descaling - The controls show the documented lock, pause, or setting state until the exact published control action is completed - If operation no longer matches that description, record the new symptom instead of treating the normal Descaling light orange after cycle — Lattissima Touch state as the diagnosis ## Causes or fault boundaries - Manufacturer-defined fault area — The water-hardness setting may still be requesting descaling - Descaling light orange after cycle — Lattissima Touch does not prove a failed control board while the documented control state is active - Model boundary — apply this interpretation only to Nespresso Lattissima Touch machines covered by the Denmark support FAQ ## Verified diagnosis - Photograph the complete Descaling light orange after cycle — Lattissima Touch display before changing controls or removing power - Confirm that the full model number is covered by this scope: Nespresso Lattissima Touch machines covered by the Denmark support FAQ - Confirm that the observed condition matches the published meaning: The water-hardness setting may still be requesting descaling - Confirm the exact model is Lattissima Touch - Check that the descaling cycle completed and the rinse was performed - Reprogram water hardness using the model assistance sequence - Run one milk-function test - Contact Nespresso if the orange light remains or milk frothing is affected - Published check — Nespresso identifies a settings correction, not a user sensor or board replacement - Published check — Persistent light requires support ## Evidence-backed actions - Nespresso identifies a settings correction, not a user sensor or board replacement - Persistent light requires support - No component repair is indicated while Descaling light orange after cycle — Lattissima Touch remains the documented status “The water-hardness setting may still be requesting descaling” ## Safety boundary Keep the machine unplugged while cleaning removable parts and never open the steam system. ## Primary evidence - Source: Nespresso official Lattissima Touch water-hardness FAQ - Source URL: https://www.contact.nespresso.com/faq-3/dk/en - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.