# Nespresso OriginalLine restricted coffee flow from a blocked pyramid plate Canonical page: https://getfixfault.com/guides/nespresso-original-pyramid-plate-blocked-flow AI-readable URL: https://getfixfault.com/guides/nespresso-original-pyramid-plate-blocked-flow.txt Last reviewed: 2026-08-08 ## Direct answer Nespresso Coffee machine Blocked pyramid plate — OriginalLine: Coffee residue may be restricting the pyramid plate that punctures the capsule. This interpretation applies to Nespresso OriginalLine machines covered by the Hungary troubleshooting FAQ in Hungary / English. ## Exact scope - Brand: Nespresso - Appliance: Coffee machine - Error code or indicator: Blocked pyramid plate — OriginalLine - Model scope: Nespresso OriginalLine machines covered by the Hungary troubleshooting FAQ - Region: Hungary / English ## What users may observe - Blocked pyramid plate — OriginalLine is shown on the Nespresso coffee machine display, indicator, or connected app - The published condition is: Coffee residue may be restricting the pyramid plate that punctures the capsule - The machine requests or cannot complete the documented cleaning, rinse, or descaling state - The important observation is when Blocked pyramid plate — OriginalLine appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Coffee residue may be restricting the pyramid plate that punctures the capsule - Blocked pyramid plate — OriginalLine does not prove an internal failure before the exact cleaning or descaling sequence is completed - Model boundary — apply this interpretation only to Nespresso OriginalLine machines covered by the Hungary troubleshooting FAQ ## Verified diagnosis - Photograph the complete Blocked pyramid plate — OriginalLine display before changing controls or removing power - Confirm that the full model number is covered by this scope: Nespresso OriginalLine machines covered by the Hungary troubleshooting FAQ - Confirm that the observed condition matches the published meaning: Coffee residue may be restricting the pyramid plate that punctures the capsule - Switch the machine off and allow the outlet area to cool - Remove the capsule and clean the accessible pyramid plate with a soft sponge or soft brush - Fill the tank and place a large cup under the outlet - Run water without a capsule 3–4 times until clear flow returns - Descale or contact Nespresso if the restriction remains - Published check — The published user procedure is accessible cleaning and water flushing - Published check — Do not remove the plate or open the brew group ## Evidence-backed actions - The published user procedure is accessible cleaning and water flushing - Do not remove the plate or open the brew group - If Blocked pyramid plate — OriginalLine returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary The plate and outlet may be hot or sharp. Disconnect power before cleaning and use only soft tools. ## Primary evidence - Source: Nespresso official OriginalLine flow troubleshooting FAQ - Source URL: https://www.contact.nespresso.com/faq/hu/en - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.