# Nespresso Vertuo empty cup after a brew cycle Canonical page: https://getfixfault.com/guides/nespresso-vertuo-empty-cup-damaged-capsule AI-readable URL: https://getfixfault.com/guides/nespresso-vertuo-empty-cup-damaged-capsule.txt Last reviewed: 2026-08-08 ## Direct answer Nespresso Coffee machine Empty cup — damaged capsule or leak: Nespresso identifies a possible damaged capsule or leak after excluding normal waste water. This interpretation applies to Nespresso Vertuo UP machines covered by the Denmark support FAQ in Denmark / English. ## Exact scope - Brand: Nespresso - Appliance: Coffee machine - Error code or indicator: Empty cup — damaged capsule or leak - Model scope: Nespresso Vertuo UP machines covered by the Denmark support FAQ - Region: Denmark / English ## What users may observe - Empty cup — damaged capsule or leak is shown on the Nespresso coffee machine display, indicator, or connected app - The published condition is: Nespresso identifies a possible damaged capsule or leak after excluding normal waste water - Leak protection or a water-detection condition is active; the display does not identify the leak location - The important observation is when Empty cup — damaged capsule or leak appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Nespresso identifies a possible damaged capsule or leak after excluding normal waste water - Empty cup — damaged capsule or leak confirms the protection condition, not whether the source is a hose, seal, connection, internal component, or installation leak - Model boundary — apply this interpretation only to Nespresso Vertuo UP machines covered by the Denmark support FAQ ## Verified diagnosis - Photograph the complete Empty cup — damaged capsule or leak display before changing controls or removing power - Confirm that the full model number is covered by this scope: Nespresso Vertuo UP machines covered by the Denmark support FAQ - Confirm that the observed condition matches the published meaning: Nespresso identifies a possible damaged capsule or leak after excluding normal waste water - Check whether the liquid stayed inside the waste container - Inspect the counter and underside for external water - Eject the capsule and inspect it for damage - Run one test with a new, undamaged capsule - Stop and contact Nespresso if the cup remains empty or the counter becomes wet - Published check — A new-capsule test is the only bounded user check - Published check — Do not order a seal, pump, or brew head from an empty cup alone ## Evidence-backed actions - A new-capsule test is the only bounded user check - Do not order a seal, pump, or brew head from an empty cup alone - If Empty cup — damaged capsule or leak returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Disconnect power if water reaches the base or plug. Do not operate a machine with external leakage. ## Primary evidence - Source: Nespresso official Vertuo waste and empty-cup FAQ - Source URL: https://www.contact.nespresso.com/faq-3/dk/en - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.