# Nespresso Vertuo Plus descaling light remains after descaling Canonical page: https://getfixfault.com/guides/nespresso-vertuo-plus-descaling-light-remains AI-readable URL: https://getfixfault.com/guides/nespresso-vertuo-plus-descaling-light-remains.txt Last reviewed: 2026-08-08 ## Direct answer Nespresso Coffee machine Two-colour descaling light remains after cycle: The Vertuo Plus has not exited its descaling state. This interpretation applies to Nespresso VertuoPlus machines covered by the Ireland support entry in Ireland / English. ## Exact scope - Brand: Nespresso - Appliance: Coffee machine - Error code or indicator: Two-colour descaling light remains after cycle - Model scope: Nespresso VertuoPlus machines covered by the Ireland support entry - Region: Ireland / English ## What users may observe - Two-colour descaling light remains after cycle is shown on the Nespresso coffee machine display, indicator, or connected app - The published condition is: The Vertuo Plus has not exited its descaling state - The affected function behaves as described by the manufacturer while Two-colour descaling light remains after cycle is present - The important observation is when Two-colour descaling light remains after cycle appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — The Vertuo Plus has not exited its descaling state - Two-colour descaling light remains after cycle identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Nespresso VertuoPlus machines covered by the Ireland support entry ## Verified diagnosis - Photograph the complete Two-colour descaling light remains after cycle display before changing controls or removing power - Confirm that the full model number is covered by this scope: Nespresso VertuoPlus machines covered by the Ireland support entry - Confirm that the observed condition matches the published meaning: The Vertuo Plus has not exited its descaling state - Turn the machine on and confirm the two-colour light - Open and close the head to eject used capsules - Empty the cup support and capsule container and add the stated water amount - Enter descaling mode with the lever and coffee button for 3 seconds - Complete the cycle, exit with the same 3-second command, and wait 10 minutes - contact Nespresso if unresolved - Published check — The official correction is a complete Vertuo Plus descaling-state procedure ## Evidence-backed actions - The official correction is a complete Vertuo Plus descaling-state procedure - No sensor or board replacement is justified from the persistent light alone - If Two-colour descaling light remains after cycle returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary The cycle can discharge hot liquid and the machine must cool before use. Keep hands away from the outlet. ## Primary evidence - Source: Nespresso official Vertuo Plus descaling recovery FAQ - Source URL: https://www.contact.nespresso.com/faq/ie/en/detail/8943 - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.