# Nespresso Vertuo Plus water in the drip tray after a rinse Canonical page: https://getfixfault.com/guides/nespresso-vertuo-plus-waste-rinse-water AI-readable URL: https://getfixfault.com/guides/nespresso-vertuo-plus-waste-rinse-water.txt Last reviewed: 2026-08-08 ## Direct answer Nespresso Coffee machine Water in drip tray — Vertuo Plus rinse: Nespresso identifies a short rinse as a normal source of water in the tray. This interpretation applies to Nespresso Vertuo machines covered by the Denmark support FAQ in Denmark / English. ## Exact scope - Brand: Nespresso - Appliance: Coffee machine - Error code or indicator: Water in drip tray — Vertuo Plus rinse - Model scope: Nespresso Vertuo machines covered by the Denmark support FAQ - Region: Denmark / English ## What users may observe - Water in drip tray — Vertuo Plus rinse is shown on the Nespresso coffee machine display, indicator, or connected app - The published condition is: Nespresso identifies a short rinse as a normal source of water in the tray - The coffee machine continues the documented operation associated with Water in drip tray — Vertuo Plus rinse; abnormal operation would be a separate symptom - If operation no longer matches that description, record the new symptom instead of treating the normal Water in drip tray — Vertuo Plus rinse state as the diagnosis ## Causes or fault boundaries - Manufacturer-defined fault area — Nespresso identifies a short rinse as a normal source of water in the tray - Water in drip tray — Vertuo Plus rinse does not prove a failure while operation remains normal - Model boundary — apply this interpretation only to Nespresso Vertuo machines covered by the Denmark support FAQ ## Verified diagnosis - Photograph the complete Water in drip tray — Vertuo Plus rinse display before changing controls or removing power - Confirm that the full model number is covered by this scope: Nespresso Vertuo machines covered by the Denmark support FAQ - Confirm that the observed condition matches the published meaning: Nespresso identifies a short rinse as a normal source of water in the tray - Confirm the liquid is inside the drip tray - Empty and dry the tray - Check the machine underside and counter for external leakage - Insert a compatible capsule and run one controlled brew - Contact Nespresso if the tray overflows or external water appears - Published check — The documented rinse behavior needs no repair - Published check — External leakage or persistent empty-cup behavior needs Nespresso diagnosis ## Evidence-backed actions - The documented rinse behavior needs no repair - External leakage or persistent empty-cup behavior needs Nespresso diagnosis - No component repair is indicated while Water in drip tray — Vertuo Plus rinse remains the documented status “Nespresso identifies a short rinse as a normal source of water in the tray” ## Safety boundary Disconnect power if water reaches the electrical base or plug. Keep the counter dry. ## Primary evidence - Source: Nespresso official Vertuo rinse/waste FAQ - Source URL: https://www.contact.nespresso.com/faq-3/dk/en - Source checked: 2026-08-08 - Procedure verified: 2026-08-08 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.