# Shark Robot vacuum 1167 error Canonical page: https://getfixfault.com/guides/robot-vacuum-shark-1167-rv2800ze AI-readable URL: https://getfixfault.com/guides/robot-vacuum-shark-1167-rv2800ze.txt Last reviewed: 2026-08-10 ## Direct answer Shark Robot vacuum 1167: the base greywater pump is not operating normally. This interpretation applies to RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article in United States / English. ## Exact scope - Brand: Shark - Appliance: Robot vacuum - Error code or indicator: 1167 - Model scope: RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article - Region: United States / English ## What users may observe - 1167 is shown on the Shark robot vacuum display, indicator, or connected app - The published condition is: the base greywater pump is not operating normally - The documented pump or circulation function does not complete as expected while 1167 is active - The important observation is when 1167 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — the base greywater pump is not operating normally - 1167 identifies the pump or circulation path but does not alone prove the pump, obstruction, wiring, or control failed - Model boundary — apply this interpretation only to RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article ## Verified diagnosis - Photograph the complete 1167 display before changing controls or removing power - Confirm that the full model number is covered by this scope: RV2800ZE, RV2800YE, and RV2800YS series models covered by the official article - Confirm that the observed condition matches the published meaning: the base greywater pump is not operating normally - Published check — Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns - Stop at the published service boundary after these actions - do not add a restart or test cycle that Shark does not specify for 1167 - Published check — Give service the 1167 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Shark does not specify for 1167 ## Evidence-backed actions - Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns - Give service the 1167 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Isolate the appliance when safe. Switch the base off, empty and reseat the accessible greywater tank as directed by Shark, and arrange service if the pump error returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: SharkNinja official robot-vacuum error-code support - Source URL: https://support.sharkninja.com/article/RV2800-Series-Error-Codes---Greywater-Pump-Broken-Error-1167 - Source checked: 2026-08-10 - Procedure verified: 2026-08-10 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.