# iRobot robot vacuum Charging Error 105 error Canonical page: https://getfixfault.com/guides/roomba-charging-error-105 AI-readable URL: https://getfixfault.com/guides/roomba-charging-error-105.txt Last reviewed: 2026-08-07 ## Direct answer iRobot Robot vacuum Charging Error 105: Low electrical current is reaching the robot. This interpretation applies to Roomba models covered by the official iRobot Charging Error Chart 19598 in Global / English. ## Exact scope - Brand: iRobot - Appliance: Robot vacuum - Error code or indicator: Charging Error 105 - Model scope: Roomba models covered by the official iRobot Charging Error Chart 19598 - Region: Global / English ## What users may observe - Charging Error 105 is shown on the iRobot robot vacuum display, indicator, or connected app - The published condition is: Low electrical current is reaching the robot - The affected function behaves as described by the manufacturer while Charging Error 105 is present - The important observation is when Charging Error 105 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — Low electrical current is reaching the robot - Charging Error 105 identifies the documented condition, not a confirmed replacement part - Model boundary — apply this interpretation only to Roomba models covered by the official iRobot Charging Error Chart 19598 ## Verified diagnosis - Photograph the complete Charging Error 105 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Roomba models covered by the official iRobot Charging Error Chart 19598 - Confirm that the observed condition matches the published meaning: Low electrical current is reaching the robot - Published check — Secure dock power, clean the charging contacts until they are visibly clean, and contact iRobot if low current is still reported - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Charging Error 105 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Secure dock power, clean the charging contacts until they are visibly clean, and contact iRobot if low current is still reported - If Charging Error 105 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Secure dock power, clean the charging contacts until they are visibly clean, and contact iRobot if low current is still reported. Do not open fixed panels or test live circuits. ## Primary evidence - Source: iRobot official Charging Error Chart - Source URL: https://homesupport.irobot.com/articles/en_US/Knowledge/19598 - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.