# iRobot robot vacuum Charging Error 2 error Canonical page: https://getfixfault.com/guides/roomba-charging-error-2 AI-readable URL: https://getfixfault.com/guides/roomba-charging-error-2.txt Last reviewed: 2026-08-07 ## Direct answer iRobot Robot vacuum Charging Error 2: The robot has detected a charging over-current fault. This interpretation applies to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 in Global / English. ## Exact scope - Brand: iRobot - Appliance: Robot vacuum - Error code or indicator: Charging Error 2 - Model scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Region: Global / English ## What users may observe - Charging Error 2 is shown on the iRobot robot vacuum display, indicator, or connected app - The published condition is: The robot has detected a charging over-current fault - The appliance has reached the manufacturer-defined stop or service condition associated with Charging Error 2 - The important observation is when Charging Error 2 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — The robot has detected a charging over-current fault - Charging Error 2 defines a service boundary; the failed internal part still requires exact-model diagnosis - Model boundary — apply this interpretation only to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 ## Verified diagnosis - Photograph the complete Charging Error 2 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Confirm that the observed condition matches the published meaning: The robot has detected a charging over-current fault - Published check — Confirm an authentic iRobot battery, check for liquid damage without opening the robot, and contact iRobot if the charge fault returns - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Charging Error 2 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Confirm an authentic iRobot battery, check for liquid damage without opening the robot, and contact iRobot if the charge fault returns - If Charging Error 2 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Isolate the appliance when safe. Confirm an authentic iRobot battery, check for liquid damage without opening the robot, and contact iRobot if the charge fault returns. Do not open fixed panels or test live circuits. ## Primary evidence - Source: iRobot official Charging Error Chart - Source URL: https://homesupport.irobot.com/articles/en_US/Knowledge/19598 - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.