# iRobot robot vacuum Charging Error 4 / 5 error Canonical page: https://getfixfault.com/guides/roomba-charging-error-4-5 AI-readable URL: https://getfixfault.com/guides/roomba-charging-error-4-5.txt Last reviewed: 2026-08-07 ## Direct answer iRobot Robot vacuum Charging Error 4 / 5: The dock or robot has a no-current or low-current charging fault. This interpretation applies to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 in Global / English. ## Exact scope - Brand: iRobot - Appliance: Robot vacuum - Error code or indicator: Charging Error 4 / 5 - Model scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Region: Global / English ## What users may observe - Charging Error 4 / 5 is shown on the iRobot robot vacuum display, indicator, or connected app - The published condition is: The dock or robot has a no-current or low-current charging fault - Charging does not start, continue, or complete in the way described for Charging Error 4 / 5 - The important observation is when Charging Error 4 / 5 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — The dock or robot has a no-current or low-current charging fault - Charging Error 4 / 5 does not alone distinguish battery condition, seating, contacts, dock, charger, temperature, or charging electronics - Model boundary — apply this interpretation only to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 ## Verified diagnosis - Photograph the complete Charging Error 4 / 5 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Confirm that the observed condition matches the published meaning: The dock or robot has a no-current or low-current charging fault - Published check — Unplug the dock for 60 seconds, secure the power connections, clean the robot and dock charging contacts, then reinstall an authentic battery if the error remains - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Charging Error 4 / 5 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Unplug the dock for 60 seconds, secure the power connections, clean the robot and dock charging contacts, then reinstall an authentic battery if the error remains - If Charging Error 4 / 5 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Unplug the dock for 60 seconds, secure the power connections, clean the robot and dock charging contacts, then reinstall an authentic battery if the error remains. Do not open fixed panels or test live circuits. ## Primary evidence - Source: iRobot official Charging Error Chart - Source URL: https://homesupport.irobot.com/articles/en_US/Knowledge/19598 - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.