# iRobot robot vacuum Charging Error 6 / 7 error Canonical page: https://getfixfault.com/guides/roomba-charging-error-6-7 AI-readable URL: https://getfixfault.com/guides/roomba-charging-error-6-7.txt Last reviewed: 2026-08-07 ## Direct answer iRobot Robot vacuum Charging Error 6 / 7: The battery temperature is too high or too low for charging. This interpretation applies to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 in Global / English. ## Exact scope - Brand: iRobot - Appliance: Robot vacuum - Error code or indicator: Charging Error 6 / 7 - Model scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Region: Global / English ## What users may observe - Charging Error 6 / 7 is shown on the iRobot robot vacuum display, indicator, or connected app - The published condition is: The battery temperature is too high or too low for charging - Charging does not start, continue, or complete in the way described for Charging Error 6 / 7 - The important observation is when Charging Error 6 / 7 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — The battery temperature is too high or too low for charging - Charging Error 6 / 7 does not alone distinguish battery condition, seating, contacts, dock, charger, temperature, or charging electronics - Model boundary — apply this interpretation only to Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 ## Verified diagnosis - Photograph the complete Charging Error 6 / 7 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Roomba and Braava models covered by the official iRobot Charging Error Chart 19598 - Confirm that the observed condition matches the published meaning: The battery temperature is too high or too low for charging - Published check — Move the robot to room temperature, allow the battery to return to a normal temperature, and retry charging once before contacting iRobot - Use the result as the decision point: if the documented condition is corrected, complete only the source-listed check; if Charging Error 6 / 7 remains, stop and move to exact-model diagnosis ## Evidence-backed actions - Move the robot to room temperature, allow the battery to return to a normal temperature, and retry charging once before contacting iRobot - If Charging Error 6 / 7 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Follow the exact model manual. Move the robot to room temperature, allow the battery to return to a normal temperature, and retry charging once before contacting iRobot. Do not open fixed panels or test live circuits. ## Primary evidence - Source: iRobot official Charging Error Chart - Source URL: https://homesupport.irobot.com/articles/en_US/Knowledge/19598 - Source checked: 2026-08-07 - Procedure verified: 2026-08-07 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.