# Samsung Air conditioner E461 error Canonical page: https://getfixfault.com/guides/samsung-air-conditioner-e461-official-code AI-readable URL: https://getfixfault.com/guides/samsung-air-conditioner-e461-official-code.txt Last reviewed: 2026-08-18 ## Direct answer Samsung Air conditioner E461: compressor start error. This interpretation applies to Samsung air conditioners covered by the official Mexico display-code support table in Mexico / Spanish support page. ## Exact scope - Brand: Samsung - Appliance: Air conditioner - Error code or indicator: E461 - Model scope: Samsung air conditioners covered by the official Mexico display-code support table - Region: Mexico / Spanish support page ## What users may observe - E461 is shown on the Samsung air conditioner display, indicator, or connected app - The published condition is: compressor start error - Airflow through the documented filter or vent path is restricted or the maintenance condition remains active - The important observation is when E461 appears and whether the exact published action changes that condition ## Causes or fault boundaries - Manufacturer-defined fault area — compressor start error - E461 does not by itself prove a fan, heater, sensor, or control failure before the accessible airflow path is checked - Model boundary — apply this interpretation only to Samsung air conditioners covered by the official Mexico display-code support table ## Verified diagnosis - Photograph the complete E461 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung air conditioners covered by the official Mexico display-code support table - Confirm that the observed condition matches the published meaning: compressor start error - Published check — Do not open, charge, vent, or test the sealed refrigerant system - Published check — Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis - Stop at the published service boundary after these actions - do not add a restart or test cycle that Samsung does not specify for E461 - Published check — Give service the E461 photo, full model and serial number, when it appeared, and the result of every published external check - Stop at the published service boundary after these actions; do not add a restart or test cycle that Samsung does not specify for E461 ## Evidence-backed actions - Do not open, charge, vent, or test the sealed refrigerant system - Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis - Give service the E461 photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Stop if there is smoke, a burning smell, damaged wiring, repeated breaker operation, or refrigerant leakage. Do not open, charge, vent, or test the sealed refrigerant system. Record the displayed code, stop repeated restarts, and contact Samsung Mexico technical support or an authorized service centre for diagnosis. ## Primary evidence - Source: Samsung Mexico official air-conditioner display-code table - Source URL: https://www.samsung.com/mx/support/home-appliances/error-codes-in-air-conditioning/ - Source checked: 2026-08-18 - Procedure verified: 2026-08-18 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.