# Samsung dishwasher 3E error Canonical page: https://getfixfault.com/guides/samsung-dishwasher-3e-code AI-readable URL: https://getfixfault.com/guides/samsung-dishwasher-3e-code.txt Last reviewed: 2026-08-04 ## Direct answer Samsung Dishwasher 3E: The incoming water is too hot. This interpretation applies to Samsung US dishwasher models covered by the linked official error-code guidance in United States / English. ## Exact scope - Brand: Samsung - Appliance: Dishwasher - Error code or indicator: 3E - Model scope: Samsung US dishwasher models covered by the linked official error-code guidance - Region: United States / English ## What users may observe - 3E appears during filling - The hot-water supply may be set above Samsung's limit - The code returns even when the supply temperature is acceptable ## Causes or fault boundaries - Hot-water supply above 176°F - A water-temperature or control fault that needs service ## Verified diagnosis - Photograph the complete 3E display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official error-code guidance - Confirm that the observed condition matches the published meaning: The incoming water is too hot - Record 3E and the exact Samsung model - Do not disconnect a hot water line - Allow the supply and appliance to cool before any external check - Verify the hot-water setting is not above Samsung's 176°F limit using a safe household check - If the temperature is within the limit and 3E remains, request service - Published check — Correct only an unsafe or excessive hot-water setting - Published check — Samsung does not publish a user repair for the internal temperature or control fault ## Evidence-backed actions - Correct only an unsafe or excessive hot-water setting - Samsung does not publish a user repair for the internal temperature or control fault - stop and arrange service when the supply is within range but 3E remains - No component repair is indicated while 3E remains the documented status “The incoming water is too hot” ## Safety boundary Hot water can cause severe burns. Do not disconnect a hot supply line; let it cool, close the shut-off, and use a qualified technician for internal diagnosis. ## Primary evidence - Source: Samsung US dishwasher error-code support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10004499/ - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.