# Samsung dishwasher 4C / 4E error Canonical page: https://getfixfault.com/guides/samsung-dishwasher-4c-4e-code AI-readable URL: https://getfixfault.com/guides/samsung-dishwasher-4c-4e-code.txt Last reviewed: 2026-08-04 ## Direct answer Samsung Dishwasher 4C / 4E: The dishwasher is not receiving water at the required pressure or temperature. This interpretation applies to Samsung US dishwasher models covered by the linked official error-code guidance in United States / English. ## Exact scope - Brand: Samsung - Appliance: Dishwasher - Error code or indicator: 4C / 4E - Model scope: Samsung US dishwasher models covered by the linked official error-code guidance - Region: United States / English ## What users may observe - 4C or 4E appears during filling - The dishwasher does not receive enough water to start or continue - A kinked supply line or unsuitable household supply may be present ## Causes or fault boundaries - The water supply is closed or restricted - Supply pressure or temperature is outside Samsung's stated range - A visible supply line or connection problem ## Verified diagnosis - Photograph the complete 4C / 4E display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official error-code guidance - Confirm that the observed condition matches the published meaning: The dishwasher is not receiving water at the required pressure or temperature - Turn the dishwasher off and close the water shut-off before touching the supply path - Confirm the shut-off valve is fully open - Inspect the visible supply line for kinks, crushing, or leaks - Check that hot-water supply is within Samsung's stated 120–149°F range and household pressure is 20–120 psi when those checks are safely available - Restore the supply and run one short fill test - request service if 4C/4E returns - Published check — Open the shut-off valve, correct only a visible hose restriction, and stop if the supply line or connection leaks ## Evidence-backed actions - Open the shut-off valve, correct only a visible hose restriction, and stop if the supply line or connection leaks - Do not select an inlet valve or internal part from 4C/4E alone - use Samsung service if the household supply is suitable and the code returns - If 4C / 4E returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Close the water shut-off before moving or disconnecting a supply line. Stop immediately if a connection leaks; do not work on live electrical parts. ## Primary evidence - Source: Samsung US dishwasher error-code support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10004499/ - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.