# Samsung dishwasher 9E error Canonical page: https://getfixfault.com/guides/samsung-dishwasher-9e-code AI-readable URL: https://getfixfault.com/guides/samsung-dishwasher-9e-code.txt Last reviewed: 2026-08-04 ## Direct answer Samsung Dishwasher 9E: The dishwasher has detected too little water. This interpretation applies to Samsung US dishwasher models covered by the linked official error-code guidance in United States / English. ## Exact scope - Brand: Samsung - Appliance: Dishwasher - Error code or indicator: 9E - Model scope: Samsung US dishwasher models covered by the linked official error-code guidance - Region: United States / English ## What users may observe - 9E appears during a cycle - The dishwasher may stop or wash poorly - The code returns after a Normal cycle ## Causes or fault boundaries - Insufficient water reached the dishwasher - A water-supply restriction or internal fill fault - A model-specific low-level condition ## Verified diagnosis - Photograph the complete 9E display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official error-code guidance - Confirm that the observed condition matches the published meaning: The dishwasher has detected too little water - Confirm the code is 9E and record the exact model - Empty the dishwasher - Add the detergent specified for the model and run one Normal cycle - Watch for leaks or abnormal filling and stop if either occurs - If 9E returns, switch off power at the circuit breaker and request Samsung service - Published check — Samsung's published user procedure for 9E is the empty, detergent, Normal-cycle test - Published check — Do not open the inlet system or choose a valve, sensor, or control part from 9E alone ## Evidence-backed actions - Samsung's published user procedure for 9E is the empty, detergent, Normal-cycle test - Do not open the inlet system or choose a valve, sensor, or control part from 9E alone - arrange service if the test fails - Give service the 9E photo, full model and serial number, when it appeared, and the result of every published external check ## Safety boundary Do not open panels or work on the inlet system. Close the water supply if a visible leak appears and stop using the appliance until it is safe. ## Primary evidence - Source: Samsung US dishwasher error-code support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10004499/ - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.