# Samsung dishwasher OC / 0C / oE error Canonical page: https://getfixfault.com/guides/samsung-dishwasher-oc-0c-oe-code AI-readable URL: https://getfixfault.com/guides/samsung-dishwasher-oc-0c-oe-code.txt Last reviewed: 2026-08-04 ## Direct answer Samsung Dishwasher OC / 0C / oE: There is more water in the dishwasher than there should be. This interpretation applies to Samsung US dishwasher models covered by the linked official drain and error-code guidance in United States / English. ## Exact scope - Brand: Samsung - Appliance: Dishwasher - Error code or indicator: OC / 0C / oE - Model scope: Samsung US dishwasher models covered by the linked official drain and error-code guidance - Region: United States / English ## What users may observe - OC, 0C, or oE appears during or after a cycle - Water remains in the tub or the dishwasher tries to drain - The sink drain, hose, filter area, or overflow path may be restricted ## Causes or fault boundaries - A blocked sink drain or disposal - A pinched or incorrectly routed drain hose - Food or debris in the accessible drain area - A fill or overflow fault requiring service ## Verified diagnosis - Photograph the complete OC / 0C / oE display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung US dishwasher models covered by the linked official drain and error-code guidance - Confirm that the observed condition matches the published meaning: There is more water in the dishwasher than there should be - If water is leaking, close the water shut-off and isolate power - Check the sink drain and garbage disposal for blockage - Inspect drain-hose routing for pinching, kinks, and the required high loop or air gap - Clean the accessible filter and drain area as the exact manual permits - Run one drain test and request service if OC/0C/oE or standing water returns - Published check — Clear only visible sink, disposal, hose, or filter restrictions and reassemble the drain area correctly - Published check — Samsung's linked guidance does not verify an internal overflow repair ## Evidence-backed actions - Clear only visible sink, disposal, hose, or filter restrictions and reassemble the drain area correctly - Samsung's linked guidance does not verify an internal overflow repair - use service when the code or water level returns - If OC / 0C / oE returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary If water is actively leaking, close the water shut-off and isolate power. Wear protection against sharp debris and do not open internal panels. ## Primary evidence - Source: Samsung US dishwasher drain and overflow support - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10004498/ - Source checked: 2026-08-04 - Procedure verified: 2026-08-04 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.