# Samsung washer 4C2 / 4E2 / CE / 14C2 / nF1 code Canonical page: https://getfixfault.com/guides/samsung-washer-4c2-4e2-ce-14c2-nf1-code AI-readable URL: https://getfixfault.com/guides/samsung-washer-4c2-4e2-ce-14c2-nf1-code.txt Last reviewed: 2026-08-03 ## Direct answer Samsung Washing machine 4C2 / 4E2 / CE / 14C2 / nF1: Hot and cold water supply lines are reversed. This interpretation applies to Samsung washing-machine models listed by the linked official code table in US / English. ## Exact scope - Brand: Samsung - Appliance: Washing machine - Error code or indicator: 4C2 / 4E2 / CE / 14C2 / nF1 - Model scope: Samsung washing-machine models listed by the linked official code table - Region: US / English ## What users may observe - 4C2 / 4E2 / CE / 14C2 / nF1 appears on the display - The current cycle may pause or stop - The affected fill, drain, door, power, or balance function may not complete ## Causes or fault boundaries - Hot and cold hoses connected to the wrong inlets - Installation or model-specific temperature-supply configuration ## Verified diagnosis - Photograph the complete 4C2 / 4E2 / CE / 14C2 / nF1 display before changing controls or removing power - Confirm that the full model number is covered by this scope: Samsung washing-machine models listed by the linked official code table - Confirm that the observed condition matches the published meaning: Hot and cold water supply lines are reversed - Turn the washer off - Confirm that the cold-water supply hose is connected firmly to the cold-water tap - Check the hose labels before moving any connection - Restart the cycle once after correcting the connection - Contact Samsung service if the code remains - Published check — Close the water taps before moving a hose - Published check — Reconnect the cold-water hose to the cold-water tap and tighten by hand according to the manual ## Evidence-backed actions - Close the water taps before moving a hose - Reconnect the cold-water hose to the cold-water tap and tighten by hand according to the manual - Open the taps and inspect for drips - Restart one cycle - Stop if a connection leaks or the code returns - If 4C2 / 4E2 / CE / 14C2 / nF1 returns after the listed action, do not repeat the same correction indefinitely; continue with exact-model diagnosis ## Safety boundary Disconnect power before inspecting hoses or accessible filters, keep hands away from moving parts, and follow the exact Samsung model manual. ## Primary evidence - Source: Samsung US washing machine information codes - Source URL: https://www.samsung.com/us/support/troubleshoot/TSG10000997/ - Source checked: 2026-08-03 - Procedure verified: 2026-08-03 Use only for the stated model and region. The linked manufacturer source remains authoritative, and an error code alone does not prove that a component has failed.